This article explains how to schedule the attack time for the buttons of a small water polo controller from Stramatel. The process is simple and makes it possible to configure the attack times reload buttons.
Setting up countdowns
Programming is done directly on the desk. Follow these steps to set up your attack times:
Turn on the console by pressing the button [
00:03].
As soon as the word
Stramatel appears on the screen, hold down the key
1 Depressed until the text disappears. The screen then switches to programming mode [
00:06].
To program the time of the key
4, use the keys
2 and
3 to adjust the time value, then validate with the key
Green [
00:09].
Repeat the same procedure for the key
3 [
00:16].
To check your programming, press both charge buttons simultaneously [
00:21].