STRAMATEL 4 or 6-Digit Clock Display – Simplified User Guide & Setup

STRAMATEL 4/6-Digit Clock Display – Simplified User Guide & Setup

🕒 4 or 6 Digit Clock Display – Simplified User Guide

⚙️ Main Controls

▶️ Right arrow – Enter, confirm, move to next parameter
🔼 / 🔽 Up / Down arrows – Scroll through menus or adjust a value
🔴 Double press on red buttons – Return quickly to the basic display (time only)

🧭 Accessing the Main Menu

From the time display, press ▶️ once.

Use 🔼 / 🔽 to scroll through the menus:

  • tIME → Clock / Date / Temperature

  • CHr → Chronometer

  • dAY → D-Day / Countdown

  • Scor → Score

  • tAI → Automatic cycles

  • OFF → Turn display off

  • ProG → General settings

Press ▶️ to enter the selected menu.
At any time, press 🔴🔴 to return to the time display.

🧩 Menu Navigation Rules

▶️ → Move to next parameter
🔼 / 🔽 → Modify value or scroll
▶️ → Confirm
🔴🔴 → Exit and return to main display

⏰ tIME – Clock / Date / Temperature

This mode displays the time, date, and temperature.

tEMP → Select temperature probe and apply correction

  • T1 / T2 / T3: select the active probe

  • x°A / x°B / x°C: correction (± °C)

Note:

  • The correction is applied to the value read by the connected probe.

  • The same offset will be used for future measurements.

  • If not all probes are connected, the correction value becomes a manual fixed temperature displayed on the clock.

dUrA / dH / dA / dtA / dtB / dtC → Set display and alternation durations

Tip: To hide an element (e.g. date or temperature), set its duration to 0.

diSP → Display animation type
0 = no animation | 1 = slow fade | 2 = medium fade | 3 = fast fade

⏱️ CHr – Chronometer

Displays a stopwatch or countdown.

  • Count up: starts from 0:00

  • Count down: example 54.2

To use countdown mode, first enter the target time from which the countdown will start.

📆 dAY – Countdown / D-Day

  • 99J → Count up from 0 to 99 days

  • –99 / –999 → Count down to 0

  • x prog (0–999) → Custom programmed display

In D-Day mode, the display scrolls the number of days until the event, then remains on “0” afterwards.

🏀 Scor – Score Display

Displays a score up to 4 digits.
➡️ Select the digit → use 🔼 / 🔽 to increase, decrease, or reset to 0.

🔁 tAI – Automatic Sequences

  • E1 → E9: active inputs

  • r1 → r9: rest inputs

  • c1 → c9: number of cycles

The sequences run automatically, and the stopwatch stops at the end of the last cycle.

📴 OFF – Display Off

Turns the display off.
➡️ To turn it back on, press ▶️ or 🔴🔴 to return to time display.

🔧 ProG – General Settings

LUM → Brightness level LU:1 → LU:4

Eco → Energy saving mode

  • Ec:on = active (brightness reduced between 23:00 and 06:00)

  • Ec:off = disabled

tAI → Number of sequences (1 to 9)

Son → Buzzer duration So:0 → So:4 s
(0 = no buzzer)

Sy:MA / Sy:ES → Clock synchronization

  • MA = Master mode

  • ES = Slave / Repeater mode

tESt → Display test (segments, text, messages)

LANG → Language selection (FR / EN / DE)

tiME → Set time and date

  • H–M → Hour / Minute

  • J–M–A → Day / Month / Year

💡 Usage Examples

➤ Display Time + Date + Temperature

  1. ▶️ → select tIME → ▶️

  2. ▶️ until tEMP → ▶️ → choose T1/T2/T3 → adjust with 🔼 / 🔽 → ▶️

  3. ▶️ until dUrA → adjust durations → ▶️

  4. ▶️ until diSP → choose animation (0–3) → ▶️

  5. 🔴🔴 to exit

➤ Set the Time and Date

  1. ▶️ → ProG → ▶️

  2. ▶️ until tiME → ▶️

  3. Adjust H–M, then J–M–A with 🔼 / 🔽 → ▶️ to confirm

➤ Adjust Brightness

  1. ▶️ → ProG → ▶️

  2. ▶️ until LUM → ▶️

  3. Select LU:1 → LU:4 → ▶️ to confirm

➤ Enable / Disable Eco Mode

  1. ▶️ → ProG → ▶️

  2. ▶️ until Eco → ▶️

  3. Choose Ec:on (active) or Ec:off (disabled) → ▶️

➤ Set Master / Slave Synchronization

  1. ▶️ → ProG → ▶️

  2. ▶️ until Sy:MA / Sy:ES → ▶️

  3. Select desired mode → ▶️ to confirm

➤ Start Test Mode

  1. Press the red buttons twice 🔴🔴 to return to the main display

  2. Press ▶️ to open the main menu

  3. Press 🔼 until ProG appears

  4. Press ▶️ to enter ProG

  5. Press 🔼 or 🔽 until tESt appears

  6. Press ▶️ to start the test

  7. The display automatically scrolls through segments, messages, program, and temperature

  8. Press the red buttons twice 🔴🔴 to return to the main display

🔙 Quick Exit

At any time: 🔴🔴 → return to the default time display.